NAREX náhradné súčiastky vŕtačky brúsky rúčka
Kategória:
Ostatné drobné
Predám rôzne NAREX náhradné plastové kryty a obaly na narex náradia.
Úplne nové nepoužité. Rúčky konce vrtaciek flexy. Kryt motora Cca 50kusov.
Úplne nové nepoužité. Rúčky konce vrtaciek flexy. Kryt motora Cca 50kusov.
Podobné inzeráty
Narex EBU 15 G
Predam elektricku uhlovu brusku Narex EBU 15 G.
Otvorene balenie, nikdy nepouzita. Parametre na foto. Predaj osobne alebo postou.
1kW SCR Triac Regulátor – Vhodny na regulaciu otáčok motora: Vŕtačky; Uhlovej brúsky; Hoblovačky; Mlynčeka a podobne; Jasu svetla; Revných telies; Špirál ohrievačov vody a vzduchu a iných spotrebičov. –
SCR/Triac 1000W AC PWM Voltage Regulator, with illuminated ON/OFF switch.
- Input 220V to 250V, 50Hz.
- Output regulation range: 50V* to supply voltage
-*Minimum output voltage adjustable via an internal multi-turn trimmer pot
- Maximum continuous load: ≤4.5A
- Illuminated ON/OFF rocker switch.
- Accepts cable sized 4mmØ to 7mmØ - eg. round 3 core 1.00mm² csa.
- Black ABS enclosure, 39 x 57 x 87 mm (H×W×L)
- Length including mounting tabs 111mm
1ks 21.00€
Kontakt: emailom alebo spravou►SMS╍►◄ email: ZME95301@
Osobny odber alebo dobierka 4.50€/list 2.00€
predám rozbehove a odrušovacie kondenzátory
1.TESLA Kondenzator rozbehovy a odrušovaci
TC-240 0,1mF+2x2k5 250V ks 13 1ks 7,40eur
2.TESLA TC-243 20k+2k5 250V ks 13 1ks 6,20eur
3.TESLA TC242 50k+5k 250V ks4 1ks 6,10eur
4.TESLA TC254 50k+5k 250V ks2 1ks 5eur
5.TESLA TC-252 M1 250V ks1 4,90
6.TESLA TC258 M1+2x2k5 250V ks3 1ks 6,80eur
7.TESLA TC-241 2x10mH 0,1mF+2x2k5 250V ks2 1ks6,80eur
8.TC250 ks1 4,70eur
PREDAM UHLIKY:
1.5X6X13 Lanko ks44 BRUSKY
2.5X6X16 Pružina+Lanko ks17 Vrtačky
3.5X6,5X15 EK-67 Pružina+Lanko ks10 Vysavač
4.5X6,5X12 EK-67 Pružina +Lanko ks27 Vysavač
5.6,5X10X25 Pružina+Lanko EK-70 ks16 Vysavač
6.5X6,5x14Pružina+Lanko MP-45P ks29 Stierače Vrtačka EV-108D
7.6,5X8X20 Lanko ks52+6
8.5x8x20 E-30 Lanko Bruska BOSCH 125 ks14
9.5x8x16 Pružina+Lanko ks6 Vrtačka EV 513D
10.5X8X21 Pružina+Lanko TU-75 ks20 Vysavač
11.5x8x25 Pružina+Lanko EK-70 ks6 Vysavač
12.5X6,5x16 Pružina+Lanko ks3 Mlynček Vrtačka EV-108D
13.5X6,5X20 Pružina+Lanko EK-70 ks15 Vrtačka EV-108D
14.5X6,5X17 Pružina+Lanko EK-67 ks6 Vrtačka EV-108D
15.4x4x21 Pružina ks30
16.5X5X12 Pružina TA-45 ks27
17.5X6X13 Pružina ks41
18.5X5X17 Pružina ks19
19.5x6,5x12 Pružina ks2 Vrtačka EV-108D
20.8x10x20 Lanko ks2
21.5x8x16 Lanko ks2
22.6,5X10x24 Lanko ks2
23.5x9x19 Lanko ks2
24.5x6,5x19 Lanko ks2
25.5x6,5x11 Pružina+Lanko ks12 Vysavač
26.4x5x12 Lanko EK-67 ks2
27.3x4x22 Lanko+Pružina ks2
28.6,5x11x26 C82 Lanko ks2
29.6,5x6,5x14 Tvrde Lanko ks4
a Dalšie SPOLU 430ks Za všetky 250eur Predaj aj po 1kuse
1kW Triak Regulátor – Vhodny na regulaciu otáčok motora: Vŕtačky; Uhlovej brúsky; Hoblovačky; Mlynčeka a podobne; Jasu svetla; Revných telies; Špirál ohrievačov vody a vzduchu a iných spotrebičov. –
SCR/Triac 1000W AC PWM Voltage Regulator, with illuminated ON/OFF switch, fuse and over-temperature thermal protection.
- Output regulation range: 50V* to mains supply
- Maximum continuous load: ≤4.5A (≈1000W)
- Overload capability 6.5 Amps (overload duration limited by thermal conditions)
- 500% instantaneous overload current withstand capacity, with 25Amp BTA24-600B-CDI Triac
-*Minimum output voltage adjustable via an internal multi-turn trimmer pot
- For use with 220V to 250V, 50Hz supply
- Illuminated ON/OFF rocker switch: Red as standard; (alt. Yellow/Blue/Green)
- Large 20mm diameter Red/Black control knob; (alt. Blue/Black, White/Black)
- 0 to 100 graduated scale for accurate adjustment
- Screw-top fuse holder with 5 × 20mm fuse
- Over-temperature thermal cut-out switch protected - 1 to 2 minute automatic reset
- Accepts cable sized 4mmØ to 7mmØ - round 3 core1.00mm² csa recommended
- Black ABS enclosure, 39 x 57 x 87 mm (H×W×L)
- Height over control knob 55mm
- Width excluding cable glands 74mm
- Length including mounting tabs 111mm
- Wiring guide/instructions included
- Weight 142g
Application notes:
- Common applications include: Tungsten halogen and other filament lamps; water heater; hot plate; other heating elements; fan/pump motors; general-purpose series wound motors/commutator motors.
- Repurposed "universal" washing machine motors, due to their wattage and electrical characteristics, are particularly well suited for speed control.
- Single-phase induction motors (capacitor motors) can be speed controlled but only in applications where the driven load is a fan or an impeller type water pump.
- Power tools with built-in speed control, soft start or other electronic safety features are not compatible with this device.
- I can advise you, so please ask if you are uncertain about its suitability for a particular application.
1ks 28.00€
Kontakt: emailom alebo spravou►SMS╍►◄ email: ZME95301@
Osobny odber alebo dobierka 4.50€/list 2.00€