Need For Speed
Kategória:
Ostatné drobné
Predám NFS payback na PS4. Iba poštou, alebo osobný odber! Špekulantov nechcem!
Podobné inzeráty
Maxon EC-Max 22
28358
rozmery motora Ø22mm x 48.5mm
oska- Ø3mm x 10mm
Brushless motor
Výkon - 25 Watt,
Motor s Hallovým senzorom
Nominal voltage 24 V
No load speed 12900 rpm
No load current 121 mA
Nominal speed 10400 rpm
Nominal torque (max. continuous torque) 22.7 mNm
Nominal current (max. continuous current) 1.4 A
Stall torque 121 mNm
Stall current 6.97 A
Max. efficiency 76 %
VALUES AT NOMINAL VOLTAGE
Nominal voltage 24 V
No load speed 12900 rpm
No load current 121 mA
Nominal speed 10400 rpm
Nominal torque (max. continuous torque) 22.7 mNm
Nominal current (max. continuous current) 1.4 A
Stall torque 121 mNm
Stall current 6.97 A
Max. efficiency 76 %
MECHANICAL DATA
Bearing type ball bearings
Max. speed 18000 rpm
Axial play 0 mm, at radial load < 4="">
0.14 mm, at radial load > 4 N
Max. axial load (dynamic) 3.5 N
Max. force for press fits (static) 53 N
(static, shaft supported) 1000 N
Max. radial load 16 N, 5 mm from flange
1kW Triak Regulátor – Vhodny na regulaciu otáčok motora: Vŕtačky; Uhlovej brúsky; Hoblovačky; Mlynčeka a podobne; Jasu svetla; Revných telies; Špirál ohrievačov vody a vzduchu a iných spotrebičov. –
SCR/Triac 1000W AC PWM Voltage Regulator, with illuminated ON/OFF switch, fuse and over-temperature thermal protection.
- Output regulation range: 50V* to mains supply
- Maximum continuous load: ≤4.5A (≈1000W)
- Overload capability 6.5 Amps (overload duration limited by thermal conditions)
- 500% instantaneous overload current withstand capacity, with 25Amp BTA24-600B-CDI Triac
-*Minimum output voltage adjustable via an internal multi-turn trimmer pot
- For use with 220V to 250V, 50Hz supply
- Illuminated ON/OFF rocker switch: Red as standard; (alt. Yellow/Blue/Green)
- Large 20mm diameter Red/Black control knob; (alt. Blue/Black, White/Black)
- 0 to 100 graduated scale for accurate adjustment
- Screw-top fuse holder with 5 × 20mm fuse
- Over-temperature thermal cut-out switch protected - 1 to 2 minute automatic reset
- Accepts cable sized 4mmØ to 7mmØ - round 3 core1.00mm² csa recommended
- Black ABS enclosure, 39 x 57 x 87 mm (H×W×L)
- Height over control knob 55mm
- Width excluding cable glands 74mm
- Length including mounting tabs 111mm
- Wiring guide/instructions included
- Weight 142g
Application notes:
- Common applications include: Tungsten halogen and other filament lamps; water heater; hot plate; other heating elements; fan/pump motors; general-purpose series wound motors/commutator motors.
- Repurposed "universal" washing machine motors, due to their wattage and electrical characteristics, are particularly well suited for speed control.
- Single-phase induction motors (capacitor motors) can be speed controlled but only in applications where the driven load is a fan or an impeller type water pump.
- Power tools with built-in speed control, soft start or other electronic safety features are not compatible with this device.
- I can advise you, so please ask if you are uncertain about its suitability for a particular application.
1ks 28.00€
Kontakt: emailom alebo spravou►SMS╍►◄ email: ZME95301@
Osobny odber alebo dobierka 4.50€/list 2.00€
Predam:
Dátový kábel – USB Hi-Speed 480 Mbps, Sync & Charge až 2.4A, pre tlačiarne a iné zariadenia s USB-B konektorom 1,8 m.
Predám nepoužitý vývojový kit LPC55S69-EVK.
Microcontroller - LPC55S69 dual core Arm Cortex-M33 microcontroller running at up to 150 MHz.
Memory Expansion - Micro SD card slot (4-bit SDIO).
Connectivity - UART and SPI port bridging from LPC55S69 target to USB via the onboard debug probe. High and full speed USB ports with micro A/B connector for host or device functionality.
Debug - Onboard, high-speed USB, Link2 debug probe with CMSIS-DAP and SEGGER J-Link protocol options.
Hardware support for external debug probe.
Sensors - NXP MMA8652FCR1 accelerometer
Audio - Stereo audio codec with a line in/out
Expansion Options - MikroEletronika Click expansion option, LPCXpresso-V3 expansion connectors compatible with Arduino® UNO Rev3, PMod compatible expansion / host connector
User Interface - RGB user LED, plus Reset, ISP, Wake, and user buttons
Obsah balenia viď. priložené foto.
Cena: 25 Eur + poštovné, alebo osobný odber
Predám nepoužitý vývojový kit Avenger 96.
Component Description
SoC STM32MP157AAC
CPU 2x ARM®Cortex-A7 up to 650 MHz
1x ARM®Cortex-M4 up to 200 MHz
GPU 1x 3D GPU Vivante® @ 533 MHz -OpenGL® ES 2.0
PMIC STPMIC1A
RAM 1024 Mbyte @ 533MHz
Storage eMMC v4.51: 8 Gbyte
QSPI: 2Mbyte
EEPROM: 128 byte
microSD Socket: UHS-1 v3.01
Ethernet 10/100/1000 Mbit/s, IEEE 802.3 Compliant
Wireless WiFi: 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
Bluetooth® v4.2 (BR/EDR/BLE)
PCB Antenna
USB Host: 2x type A, 2.0 high-speed
OTG: 1x type micro-AB, 2.0 high-speed
Display HDMI:cWXGA (1366x768)@ 60 fps, HDMI 1.4
Obsah balenia viď. priložené foto.
Cena: 40 Eur + poštovné, alebo osobný odber